1, check whether there is foreign body inside the crushing chamber (before starting must be empty), connected to the power supply.
2, tighten the cover and wing nuts of the crushing chamber.
3, start the motor, empty machine 1 to 2 minutes, then slowly from the feed plate by feeding materials, feeding shoulds not be too much too fast.
4, in case of material and motor does not turn, please shut down immediately, in order to avoid motor burned, after being cleared the card material, may continue to use.
5, the machine is in use process are strictly prohibited to open the cover and hand into the crushing chamber.
6, the machine is dry mill, unfavorable crushing moisture content and fat content.
7, please change according to the different user screen.
8, the machine adopts overheat protector, such as the motor load is too large, will automatically stop, such as to continue operation, please press the protector again.
9, in the process of the machine working, the electric current shall not be greater than 15 amperes.